Aneros Vivi

Pair the Aneros Vivi with ToyControl over Bluetooth. The Vivi shows up as "Massage Demo" in the Bluetooth chooser; here is the pairing flow.

The Aneros Vivi is an app-connected Kegel and G-spot vibrator with two motors. It pairs with ToyControl over Bluetooth, with one quirk: the Vivi advertises as "Massage Demo" in the system Bluetooth chooser, not as "Vivi" or "Aneros".

Before you start

• The Vivi should be fully charged.
• Close the Aneros app if it is open.
• If the Vivi paired elsewhere recently, turn it off and on.

Pair the Vivi

1. Open ToyControl at toycontrol.app in Chrome or Edge.
2. Press and hold the Vivi's power button until the indicator light starts blinking. That is pairing mode.
3. In ToyControl, click the + in the Devices section.
4. Pick Aneros Vivi from the catalog.
5. In the Bluetooth window, look for the entry "Massage Demo". That is your Vivi. Select it.
6. Click Pair.
7. The Vivi appears in the sidebar with a green dot.

Test it

Click Test toy at the bottom. Both Vivi motors (perineum and internal) should activate briefly.

A note on the Vivi

The Vivi is the only Aneros toy that pairs with ToyControl. The classic Aneros prostate range (Helix, Eupho, Progasm) is motor-free and does not connect to anything. The powered Aneros Vice line is controlled by a radio remote, not by Bluetooth, so it does not pair with ToyControl either.

Troubleshooting

• No "Massage Demo" entry in the Bluetooth window. Make sure the Vivi is in pairing mode (light blinking). Close the Aneros app. Turn the Vivi off and on.
• Pairs but does not respond. Check the per-device intensity slider and the speed range maximum.
• Only one motor responds. This is usually a hardware-side issue. Test with the Aneros app; if the same motor is dead there, contact Aneros support.

Related

• How to pair your first toy
• Toys that work with ToyControl
• Aneros and ToyControl, what actually connects