The Cowgirl

Pair The Cowgirl, The Unicorn, or The Cone with ToyControl over Bluetooth. Premium sit-on machines with vibration and rotation.

The Cowgirl is a premium sit-on machine with vibration and rotation. The Unicorn is a cosmetic version with identical behaviour. The Cone is a compact sit-on with vibration only. All three pair with ToyControl over Bluetooth.

Before you start

The machine should be fully charged.
Close The Cowgirl app on your phone if it is open.
Place the machine on a stable surface before pairing. Set the speed range maximum low for the first run.

Pair the machine

Open ToyControl at toycontrol.app in Chrome or Edge.
Turn the machine on. The indicator light starts blinking when it is in pairing mode.
In ToyControl, click the + in the Devices section.
Pick The Cowgirl, The Unicorn, or The Cone (Cowgirl Cone) as it matches.
In the Bluetooth window, select your machine.
Click Pair.
On The Cone, the first connection takes a few seconds while the machine completes its setup.
The machine appears in the sidebar with a green dot.

Test it

Click Test toy at the bottom. The machine should run briefly. Keep the speed range maximum low until you are confident with the response.

Safety

These are physical machines. Always:

Cap the speed range maximum at 60-70% for your first session.
Use the in-app Stop button to cut output immediately.
Use plenty of water-based lubricant; sit-on machines run friction-heavy.

Troubleshooting

Machine is not in the Bluetooth window. Close The Cowgirl app. Turn the machine off and on. Move closer to the computer.
Pairs but does not respond. Check the per-device intensity slider and the speed range maximum.
The Cone takes a long time to connect. This is normal on first connect (about three seconds of init time). If it does not finish, power-cycle the Cone and try again.