Lovehoney Desire
Pair the Lovehoney Desire Prostate Vibrator, Knicker Vibrator, or Love Egg with ToyControl over Bluetooth.
The Lovehoney Desire line includes the Prostate Vibrator, the Knicker Vibrator, and the Love Egg. The app-controlled versions pair with ToyControl over Bluetooth. Some Desire SKUs ship with an RF-remote instead of an app; those cannot pair with anything other than their bundled remote. Check the box for "app-controlled" or "Bluetooth" before you start.
Before you start
- The toy should be fully charged.
- The toy must be an app-controlled Desire SKU, not an RF-remote-only one.
- Close the Desire by Lovehoney app if it is open.
- If the toy paired elsewhere recently, turn it off and on.
Pair the toy
- Open ToyControl at toycontrol.app in Chrome or Edge.
- Press and hold the toy's power button until the indicator light starts blinking. That is pairing mode.
- In ToyControl, click the + in the Devices section.
- Pick the matching card: Lovehoney Desire Prostate Vibrator, Lovehoney Desire Knicker Vibrator, or Lovehoney Desire Love Egg.
- In the Bluetooth window, select your toy.
- Click Pair.
- The toy appears in the sidebar with a green dot.
Test it
Click Test toy at the bottom. The toy should respond briefly. On the Prostate Vibrator, both motors should activate.
Troubleshooting
- Toy is not in the Bluetooth window. Close the Desire by Lovehoney app. Turn the toy off and on. Confirm your toy is the app-controlled version, not RF-remote-only.
- Pairs but does not respond. Check the per-device intensity slider and the speed range maximum.
- Only one motor responds (Prostate Vibrator). Usually a hardware issue. Test with the Desire by Lovehoney app; if the same motor is dead there, contact Lovehoney support.