Magic Motion
Pair Magic Motion toys with ToyControl over Bluetooth. Covers the Eidolon, Awaken, Equinox, Solstice, Sundae, Bunny, and the rest of the Magic Motion lineup, plus the LoveLife Krush.
Magic Motion has a wide range with several internal protocol generations. The catalog has one card per model and ToyControl handles the differences automatically. The LoveLife Krush (sold under OhMiBod) uses the same backend.
Before you start
- The toy should be fully charged.
- Close the Magic Motion app on your phone if it is open.
- If the toy paired elsewhere recently, turn it off and on.
Pair the toy
- Open ToyControl at toycontrol.app in Chrome or Edge.
- Press the power button on the toy. Most Magic Motion toys enter pairing mode automatically when turned on, with the indicator light blinking. A few models need a press-and-hold; check the toy's manual.
- In ToyControl, click the + in the Devices section.
- Pick the matching Magic Motion model (for example, "Magic Motion Eidolon" or "Magic Motion Sundae"). For OEM rebrands or older Magic Motion toys, pick Magic Motion (other models).
- In the Bluetooth window, select your toy.
- Click Pair.
- The toy appears in the sidebar with a green dot.
Test it
Click Test toy at the bottom. The toy should respond briefly.
OEM rebrands
Magic Motion's protocol is widely rebranded: FitCute, FunTown, G-Vibe Gballs, Femometer, and others. If your toy is not listed by its brand name in the catalog, try Magic Motion (other models), which catches the OEM range.
Troubleshooting
- Toy is not in the Bluetooth window. Close the Magic Motion app. Turn the toy off and on.
- Pairs but does not respond. Check the per-device intensity slider is above zero.
- Wrong model picked. Magic Motion names are similar (Solstice and Solstice X, Sundae and Sundae+). Check the model name on the back of the toy. The wrong card will connect over Bluetooth but can behave oddly.