Motorbunny

Pair the Motorbunny Original or Buck with ToyControl over Bluetooth, via the LINK controller.

The Motorbunny is a premium sit-on machine with vibration and rotation. The Original is the rotating ride-on; the Buck adds automatic thrusting motions. Both connect over Bluetooth through the separate LINK controller (the small handheld unit). The machine itself is mains-powered; LINK is what speaks Bluetooth.

Before you start

• Plug the machine into a wall outlet with its power adapter. The Motorbunny Original and Buck are AC-powered, not battery-rechargeable.
• Make sure the LINK controller is charged.
• Close the Motorbunny LINK Controller app (or Fluffer, on 2025 hardware) if it is open.
• Place the machine on a stable surface before pairing. Set the speed range maximum low for the first run.

Pair the machine

1. Open ToyControl at toycontrol.app in Chrome or Edge.
2. Turn on the machine and the LINK controller. The LINK indicator starts blinking in pairing mode.
3. In ToyControl, click the + in the Devices section.
4. Pick Motorbunny Original or Motorbunny Buck as it matches.
5. In the Bluetooth window, select your LINK controller.
6. Click Pair.
7. The machine appears in the sidebar with a green dot.

Test it

Click Test toy at the bottom. The machine should run briefly. Keep the speed range maximum low until you are confident with its response.

Safety

These are physical machines. Always:

• Cap the speed range maximum at 60-70% for your first session.
• Use the in-app Stop button to cut output immediately.
• Use plenty of water-based lubricant.

Troubleshooting

• LINK is not in the Bluetooth window. Close the Motorbunny LINK Controller app (or Fluffer). Turn LINK off and on. Move closer to the computer.
• Pairs but does not respond. Check the per-device intensity slider and the speed range maximum.

Related

• How to pair your first toy
• Toys that work with ToyControl
• The best fucking machines for ToyControl in 2026