We-Vibe

Pair We-Vibe toys with ToyControl over Bluetooth. Covers the Sync 2, Chorus, Nova 2, Moxie+, Vector+, Bond, Rave, Verge, Ditto, Wand 2, and the older We-Vibe range.

We-Vibe toys pair with ToyControl over Bluetooth, no We-Vibe app needed (formerly known as We-Connect). The flow is the same across the We-Vibe range.

Before you start

The toy should be fully charged.
Close the We-Vibe app on your phone if it is open.
If the toy paired elsewhere recently, turn it off and on to free its Bluetooth.

Pair the toy

Open ToyControl at toycontrol.app in Chrome or Edge.
Press and hold the power button on the toy until the indicator light starts blinking. That is pairing mode.
In ToyControl, click the + in the Devices section.
Pick the matching We-Vibe model (for example, "We-Vibe Chorus" or "We-Vibe Nova 2"). For older or less-common We-Vibe toys, pick We-Vibe (other models).
In the Bluetooth window, select your toy.
Click Pair.
The toy appears in the sidebar with a green dot.

Test it

Click Test toy at the bottom. On dual-motor models, both motors should activate briefly.

A note on dual-motor toys

We-Vibe couples vibrators (Sync, Chorus, Nova) have two motors. ToyControl drives them through the standard We-Vibe protocol; both motors share the intensity signal. Per-motor control is not exposed.

Older models

The Tango, Touch, and Match are older We-Vibe toys with an older Bluetooth stack. They may not pair directly; if so, use the Intiface bridge instead. See Pair via Intiface Central.

Troubleshooting

Toy is not in the Bluetooth window. Close the We-Vibe app. Turn the toy off and on. Move closer.
Pairs but does not respond. Check the per-device intensity slider and the speed range maximum.
Drops or feels laggy under fast scripts. We-Vibe's Bluetooth stack is less responsive than Lovense under heavy script load. Use Patterns or slower scripts for the smoothest feel.