What the lights on your Lovense toy mean
Lovense toys use a small indicator light to show charging, pairing, and connected status. A quick reference for every state.
Every Lovense toy has a small indicator light that tells you the state of the toy at a glance. Knowing what each pattern means saves time when something is not working.
The standard Lovense indicator code
This applies to Lush, Hush, Domi, Edge, Nora, Max, and the rest of the range. Lovense uses the light pattern, more than the colour, to tell you what is happening.
| Light | What it means |
|---|---|
| Solid red | Charging. The toy is on the cable and not yet full. |
| No light while on the charger | Fully charged. The red light turns off when charging finishes. |
| Blinking | In pairing mode, ready for an app to connect. |
| Steady light | On and connected to an app. |
| No light, off the charger | Off, or the battery is empty. |
The exact behaviour can vary slightly between models. If in doubt, check the manual for your specific toy.
The most common scenarios
"My toy is blinking but ToyControl cannot find it"
A blinking light means the toy is in pairing mode and looking for an app. ToyControl should be able to see it. If not:
- Make sure the Lovense Remote app on your phone is closed. One app at a time.
- Make sure your computer's Bluetooth is on.
- See My toy is not showing up.
"My toy shows a solid red light"
Solid red means the toy is charging. Leave it on the cable. When it is full, the red light turns off.
- If it is plugged in but no light comes on at all, the cable or the charging contacts may be dirty or worn. Try a different cable and clean the contacts with a dry cloth.
- If a fully empty toy does not respond, give it 30 minutes on the charger. Some Lovense toys need a longer first charge to recover from a flat battery.
"My toy has no light at all"
If it is off the charger:
- It is off. Press and hold the power button.
- If holding the power button does nothing, the battery is empty. Charge it for 30 minutes and try again.
- If it still does not respond after charging, the battery may be at the end of its life. Contact Lovense support.
If it is on the charger with no light, that usually means it is fully charged.
Charge time
A Lovense toy shows a solid red light while charging, and the light turns off when it is full. Most Lovense toys take somewhere between roughly one and a half and three hours to charge fully, depending on the model. Check your toy's manual for the exact figure.
You do not need to wait for a full charge to pair. Once the toy has had a reasonable charge, you can start using it.
Non-Lovense toys
The indicator code above is Lovense-specific. Other brands use their own conventions:
- Tremblr FM-T: a single multi-colour light. Green when connected, lit during charging, blinking during pairing.
- Hismith machines: a power light on the unit, plus a small Bluetooth indicator. Check your model's manual.
- Kiiroo KEON: the KEON flashes green when fully charged. A white light indicates Manual mode, not charge state. Check the Kiiroo manual for its other states.
For any non-Lovense toy, the manufacturer's manual or product page is the reliable source.
A quick check before troubleshooting
If you are not sure whether your toy is on, paired, or charged, look at the light first:
- No light, and off the charger? Press the power button.
- Blinking? Open ToyControl and pair it.
- Steady light? It is on. Pair it in ToyControl if you have not.
- Solid red? It is charging. Leave it, or unplug it once the light goes out.
That covers most "wait, what is my toy doing" moments.