Lovense Domi
Pair your Lovense Domi or Domi 2 wand vibrator with ToyControl. Works in Chrome or Edge on your computer, or Chrome on Android.
The Lovense Domi and Domi 2 are wand-style vibrators that work with ToyControl directly. You pair from your browser, no Lovense Remote app needed.
Before you start
- The Domi should be fully charged. Lovense toys show a solid red light while charging; the light turns off when the toy is full.
- Close the Lovense Remote app on your phone if open.
- If the Domi was paired elsewhere recently, turn it off and back on.
Pair the Domi
- Open ToyControl at toycontrol.app.
- Press and hold the power button on the Domi until it starts flashing blue (pairing mode).
- In ToyControl, click the + in the Devices section of the sidebar.
- Pick Lovense Domi from the catalog.
- In the Bluetooth window your browser opens, click your Domi.
- Click Pair.
- The Domi appears in the sidebar with a green dot.
Test the Domi
Click Test toy at the bottom. The Domi ramps up, holds, then ramps down. You should hear and feel the motor.
What you can do now
The Domi is a strong wand vibrator. It is excellent for:
- Patterns at full multiplier (the Domi has plenty of power for high settings).
- Scripts as a vibrator (set Multiplier 1.0x, no Stretch needed).
- Remote control rooms as a receiver, since the strong motor responds well to varied input.
If the Domi feels too strong:
- Set the Multiplier to 0.5x or 0.7x.
- Set a Speed range max of 50 or 60.
- Drop the per-device intensity below 100%.
Troubleshooting
- Domi is not in the Bluetooth window. Close the Lovense Remote app on your phone. Hold the power button to enter pairing mode (the light should flash blue).
- Pairs but vibrates very weakly. Check the per-device intensity slider. Domi has a strong motor; if it feels weak, the source signal is probably the cause.