Lovense Nora

Pair your Lovense Nora rabbit vibrator with ToyControl. Two motors and rotation handled through standard Lovense Bluetooth.

The Lovense Nora is a rabbit-style vibrator with two motors: an internal rotating shaft and an external vibrating arm. Both controllable independently. ToyControl pairs the Nora the same way as any other Lovense toy.

Before you start

The Nora should be fully charged. A solid red light means it is still charging; the light turns off when the Nora is full.
Close the Lovense Remote app on your phone.
If the Nora was paired elsewhere recently, turn it off and back on to release its Bluetooth.

Pair the Nora

Open ToyControl at toycontrol.app in Chrome or Edge.
Press and hold the Nora's power button until it starts blinking (pairing mode).
In ToyControl, click the + in the Devices section.
Pick Lovense Nora from the catalog.
In the Bluetooth window, select your Nora.
Click Pair.
The Nora appears in the sidebar with a green dot.

Test the Nora

Click Test toy at the bottom of the screen. Both the rotation and the external vibration motor should activate briefly.

Rotation and vibration

The Nora has two separate motors:

Rotation moves the internal shaft in a circular motion.
Vibration runs the external arm.

ToyControl drives both through the standard Lovense protocol. When a script or pattern fires, both motors respond. The exact balance is set by the source signal and your tuning.

What you can do now

The Nora suits:

Patterns, especially with the rotation creating a different sensation than a flat vibrator. Try the Tease and Ride presets.
Scripts, with both motors syncing to the action.
Remote control rooms for a partner-driven session.

Tuning

If the rotation feels too strong (or weak) relative to the vibration:

The Lovense protocol does not give us per-motor intensity control through the standard channel today.
Use the Multiplier in ToyControl's bottom bar to scale both motors uniformly.
The Lovense Remote desktop app has per-motor controls if you ever need them, but for ToyControl sessions both motors share the signal.

Troubleshooting

Nora not in the Bluetooth window. Close the Lovense Remote app. Hold the power button until the light blinks (pairing mode).
Rotation works but vibration is weak (or vice versa). This is a hardware-side balance, not a ToyControl setting. The motors have different output curves.
Pairs but does not move. Check the per-device intensity in the sidebar and the speed range in the bottom bar.